Pressure Governor Comparison ChartPressure sensor datasheet (300/600 PSI)The Total Pressure Governor (TPG) is an SAE J1939 Controller Area Network (CAN) device that controls engine speed using data communications directly to the engine ECU or with an analog control signal. By operating on the J1939 network, the governor is able to monitor engine RPM and other pertinent data directly from the engine ECU. Engine information is available directly so that NFPA required instrumentation is delivered through a single unit saving panel space and delivering engine specific warnings as determined by each engine manufacturer. Control algorithms are optimized to take advantage of the J1939 CAN data to yield crisp and accurate control of engine and subsequently pump speed and pressure output. On units with starting with software version 7.xx the Governor when first installed and powered will step through a CAN Auto BAUD rate detection sequence. Once the Governor determines which BAUD rate the CAN bus is running on it will save it to memory. For engines that may not support the data link control, an analog output signal is available to provide precise control of the engine speed and pressure.
| Country of Manufacture | US |
|---|---|
| Width | 4.437" (112.7mm) |
| Height | 6.0" (152.39mm) |
| Depth | 2.25" (57.15mm) |
| Volts | +9 VDC . +32 VDC |
| Amperage | 350 mA (13.8 VDC) / 195 mA (27.6 VDC) |
| Can Specification | SAE J1939: 125, 250, 500 Kbits/second |
| Engine | Cummins, Mercedes, PGN0, Analog, PWM, Volvo FE/FL, Volvo FM/FH, Scania BWS, Scania BCI, FAW, MAN |
| Enviromental Range | IP 67 |
Output power (Alarm)
Protection
| Name | Sheet # | |
|---|---|---|
| Pressure Governor Comparison Chart | |
| Pressure sensor datasheet (300/600 PSI) | 1 |
